by Earth Anchors | Nov 8, 2018
Savièse Slope Stabilisation - Switzerland Project Specification Soon after this 14m high slope had been excavated for a new building, a section of the slope failed due to unforeseen ground conditions leading to the immediate closure of the site. Before construction...
by Earth Anchors | Jul 7, 2017
Mount Cotton Embankment - Redland, Australia Project Specification For permanent stability to support the Mount Cotton Road in South East Queensland, embankment stability measures were designed for an approximately 130m long slope, up to 4m in height with maximum...
by Earth Anchors | Jul 7, 2017
Winston Salem State University Slope Stabilisation - USA Project Specification To provide much needed access to two remote parking lots at Winston Salem State University, a bridge was built that will cross over an existing rail line and connect the lots to the main...
by Earth Anchors | Jul 7, 2017
Slope Stabilisation - Switzerland Project Specification As part of the original construction, large diameter timber poles were used to create a retaining structure to support the slope below the new house. Sixteen years later this wooden section had almost completely...
by Earth Anchors | Jul 7, 2017
Burgess Hill Embankment Strengthening Project Specification Stabilisation and reinforcement was required for a 1000m stretch of railway embankment between Burgess Hill and Hassocks on the Brighton Line. This comprised the installation of sheet piles to a depth of up...
