T-FITTING
ASSEMBLY INSTRUCTIONS
PRINT THIS PAGE
PRINT BROCHURE
ENQUIRY FORM
Download it Here
Insert the T-Fitting in the ground anchor socket and turn to engage.
The T-Fitting must be secured with the
T-Wedge. Push the
T-Wedge into the ground anchor socket behind the T-Fitting as far as it will go.
Raise the T-Fitting to fully engage the
T-Wedge. The tab may then be twisted off.
Site Map
The following instructions apply to the fitting of the T-Loc, T-Eye and T-Knuckle lower terminations.
       
 
       
  T-fitting on Aluminium Bronze anchor
       

UK - Office address Platipus Anchors Limited - UK Office Kingsfield Business Centre, Philanthropic Road, REDHILL, Surrey, RH1 4DP, England.
Tel:  +44 (0) 1737 762300  Fax: +44 (0) 1737 773395  Email:  info@platipus-anchors.com
  Platipus Anchors Inc- USA Office 2008 Garner Station Boulevard, Raleigh, NC 27603, USA.
Tel:  866 PLATIPUS (752 8478)  Fax: 919 859 9597  Email:  info@platipus-anchors.com