PLATI-HOOK The Plati-Hook is a simple tool used for loadlocking lightweight ground anchor systems quickly and efficiently by hand. The hook is placed through the eye of the installed anchor system. By pulling up on the handle the ground anchor will rotate and loadlock. In addition, a single drive rod can be placed through the handle of the Plati-Hook to enable two operators to apply an increased load.
			MANUAL STRESSING JACK A lightweight manual stressing jack capable of loadlocking an anchor system up to 15kN. Operates at 90°, 60° or 45°. When used with an in-line load cell it enables accurate proof loads to be measured.
			HYDRAULIC STRESSING JACK A hydraulic loadlocking unit designed to loadlock and proof load ground anchor systems to a pre-set load of 35kN. It operates using a standard 30 lpm / 2000psi hydraulic power pack and is compatible with anchor systems with a hard eye top termination.

			Platipus Anchors Limited - UK Office Kingsfield Business Centre, Philanthropic Road, REDHILL, Surrey, RH1 4DP, England. Tel:  +44 (0) 1737 762300  Fax: +44 (0) 1737 773395  Email:  info@platipus-anchors.com
			Platipus Anchors Inc- USA Office 2008 Garner Station Boulevard, Raleigh, NC 27603, USA. Tel:  866 PLATIPUS (752 8478)  Fax: 919 859 9597  Email:  info@platipus-anchors.com