PLATI-DRAIN Plati-Drain is a unique solution to assist in the reduction of pore water pressure within clay slopes and behind temporary or permanent retaining walls.
				PASSIVE 'STEALTH' PLATI-DRAIN The passive system uses a sacrificial earth anchor head, normally manufactured in a low cost material like aluminium alloy, to drive the Plati-Drain into its optimum position, providing an immediate channel for water to drain.
				ACTIVE 'STEALTH' PLATI-DRAIN The active system uses an aluminium bronze anchor head to drive the Plati-Drain into the ground. An additional stainless steel wire tendon is attached which allows the earth anchor to be loadlocked, providing effective draining and restraining capability simultaneously. This system also has a life expectancy of 100+ years.
				ACTIVE 'BAT' PLATI-DRAIN This active system uses a Cast Spheroidal Graphite Iron anchor head to drive the Plati-Drain into the ground. As the Bat earth anchor is wider than the Stealth earth anchor the Plati-Drain is introduced as a double leg system. This increases the efficiency of the draining and allows higher anchor loads to be reached.

			Platipus Anchors Limited - UK Office Kingsfield Business Centre, Philanthropic Road, REDHILL, Surrey, RH1 4DP, England. Tel:  +44 (0) 1737 762300  Fax: +44 (0) 1737 773395  Email:  info@platipus-anchors.com
			Platipus Anchors Inc - USA Office 2008 Garner Station Boulevard, Raleigh, NC 27603, USA. Tel:  866 PLATIPUS (752 8478)  Fax: 919 859 9597  Email:  info@platipus-anchors.com