HOW A PERCUSSION DRIVEN MECHANICAL EARTH ANCHOR WORKS (In its lightest form)
PRINT THIS PAGE
PRINT BROCHURE
Print Engineering Brochure
ENQUIRY FORM
Download it Here
Site Map
DOWNLOAD FLASH
PLAYER HERE

 

Print just this page


 
   
 
 
 
 

 

 
There are three main stages to the installation of an earth anchoring system:
Driving the anchor DRIVING THE EARTH ANCHOR

Drive the earth anchor system into the ground to the required installation depth.

Removing the rods REMOVING THE RODS
Remove the drive rod from the body of the earth anchor, either by hand or using rod removing equipment.
Loadlocking the anchor LOADLOCKING
Loadlock the earth anchor system into its working position by applying a load to the wire tendon.
The same three stages of installation are applied to all Platipus earth anchor systems, from the smallest S2 to the largest B10 anchor. This is achieved by percussive installation. We separate the method of installation of our earth anchors into three simple categories – light, medium and heavy.

spacer spacer
spacer spacer
spacerspacer UK - Office address address Platipus Anchors Limited - UK Office Kingsfield Business Centre, Philanthropic Road, REDHILL, Surrey, RH1 4DP, England.
Tel:  +44 (0) 1737 762300  Fax: +44 (0) 1737 773395  Email:  info@platipus-anchors.com
spacer
spacerpixel
spacer
spacer spacer spacer Platipus Anchors Inc - USA Office 2008 Garner Station Boulevard, Raleigh, NC 27603, USA.
Tel:  866 PLATIPUS (752 8478)  Fax: 919 859 9597  Email:  info@platipus-anchors.com
spacerspacer