SOFT EYE This type of termination can only be used with an earth anchor which has an eye. For material compatibility an aluminium ferrule is used with a plastic impregnated or galvanised wire tendon and a copper ferrule is used with a stainless steel wire tendon.
			T-LOC The main advantage of this type of termination is the flexibility it gives for on-site anchor system assembly. The 'Stealth' S10 and all sizes of the 'Bat' anchor have been designed to T-Loc specification. The T-Loc is secured in the earth anchor using a T-Wedge.
			T-EYE The T-Eye is a simple fitting used to connect T-Loc earth anchors to round strand wire tendon. It is available in galvanised steel and gives flexibility for on-site anchor system assembly. The T-Eye is compatible with tendon sizes up to 16mm and is secured in the earth anchor using a T-Wedge.
			ENVIRONMENTAL SEALS To enable an aluminium ferrule and a galvanised T-Loc to be swaged onto plastic impregnated wire tendon, the outer covering of the plastic must be stripped to expose the galvanised wire tendon underneath. Consequently the swaged ferrule, T-Loc and exposed wire tendon are covered and environmentally sealed using a heat shrink sleeve. The sleeve ensures that water cannot penetrate into the galvanised wire tendon, maintaining the plastic impregnated wire tendons resistance to corrosion.

			Platipus Anchors Limited - UK Office Kingsfield Business Centre, Philanthropic Road, REDHILL, Surrey, RH1 4DP, England. Tel:  +44 (0) 1737 762300  Fax: +44 (0) 1737 773395  Email:  info@platipus-anchors.com
			Platipus Anchors Inc - USA Office 2008 Garner Station Boulevard, Raleigh, NC 27603, USA. Tel:  866 PLATIPUS (752 8478)  Fax: 919 859 9597  Email:  info@platipus-anchors.com