Print Engineering Brochure
LIGHT PERCUSSIVE INSTALLATION
PRINT THIS PAGE
PRINT BROCHURE
The earth anchors associated with a light percussive installation can generally be installed by hand or by using a lightweight hand held percussive breaker. The smaller S2 & S4 Stealth anchors can normally be loadlocked by hand. Larger Stealth anchors, the S6 and S8, usually require a stressing jack to loadlock them into their working position.
Contact Us
ENQUIRY FORM
Download Acrobat Reader
Download it Here
Site Map
DOWNLOAD FLASH
PLAYER HERE





 
   
 
 
 
 

 
 
STAGE ONE - DRIVING THE EARTH ANCHOR
Drive the earth anchor system into the ground to the required installation depth.
 
STAGE TWO - REMOVING THE RODS
Remove the drive rod from the body of the earth anchor, either by hand or using rod removing equipment.
 
STAGE THREE - LOADLOCKING
Loadlock the earth anchor system into its working position by applying a load to the wire tendon.

spacer spacer
spacer spacer
spacerspacer UK - Office address address Platipus Anchors Limited - UK Office Kingsfield Business Centre, Philanthropic Road, REDHILL, Surrey, RH1 4DP, England.
Tel:  +44 (0) 1737 762300  Fax: +44 (0) 1737 773395  Email:  info@platipus-anchors.com
spacer
spacerpixel
spacer
spacer spacer spacer Platipus Anchors Inc - USA Office 2008 Garner Station Boulevard, Raleigh, NC 27603, USA.
Tel:  866 PLATIPUS (752 8478)  Fax: 919 859 9597  Email:  info@platipus-anchors.com
spacerspacer