Stealth Anchor - Underwater
The Stealth anchor is designed to cover a wide range of lightweight anchoring solutions. Its chisel point and streamline shape makes installation easy using simple hand tools. Each anchor can be supplied with either a wire, rod or chain of a length to match the minimum installed depth.
The table below should be read taking into consideration the following points:-
- In underwater applications the soil density will be reduced by the density of the water and therefore holding capacities are reduced by approximately half as depicted in the ‘table below’.
- The anchor capacity is reliant on the ground conditions in which it is placed.
- Our ‘Typical Load Range’ is based on conservative assumptions / calculations, data and 25 years of experience.
- The range of ‘Typical Loads’ gives an indication of each of the anchors performance in a selection of materials from alluvial CLAY to dense SAND.
- In many situations the soil material may be mixed and therefore the holding capacity may vary.
- All the indicated loads are based on the anchors being driven to the full ‘Minimum Driven Depth’.
Interactive Brochure
View Interactive Brochure
